Construction of insulator mold


Dongguan Guandong Rubber Plastic Co., Ltd., related to composite insulator molds:
How to manufacture insulator molds with fast production efficiency and good product quality?
An insulator mold, including an upper mold, a lower mold, and a core rod; The utility model also includes a mold ejection mechanism and a sandwich mechanism; The ejection mechanism includes a walking frame, a moving bracket, a jacking mechanism, and a driving mechanism; The jacking mechanism is adjacent to the lower mold; The traveling frame is fixed on the jacking end of the jacking mechanism; The top of the walking frame is provided with a slide rail; The mobile bracket comprises a frame and a bracket; A sliding sleeve is arranged at the bottom of the frame; A sliding sleeve is slidably arranged on the slide rail to slide the frame onto the traveling frame; The bracket is fixed on the frame; The bracket is movably arranged in the lower mold; A driving mechanism is arranged on a walking frame; The driving end of the driving mechanism is fixedly connected to the frame;
The upper mold is pressed onto the top of the lower mold; A core rod is arranged between the upper mold and the lower mold, and the core rod is located above the bracket; The upper mold, the lower mold, the core rod, and the bracket are enclosed to form an insulator mold cavity;
The sandwich mechanism comprises a drive source, a telescopic rod, a push block, a clamp block, a slider, and a sandwich rod; A driving source is arranged at one end of the lower mold; One end of the telescopic rod is fixed on the output end of the driving source; The push block is fixed on the telescopic rod and slidably arranged on the lower mold; A inclined rail is arranged on the push block; The clamp block slides against the top of the push block and is fixed to the lower mold; A slider is slidably arranged between clamping blocks; A guide rod is arranged on the slider; The guide rod is slidably arranged in the inclined rail; One end of the sandwich rod is fixed on the slider; The other end of the sandwich rod is pressed against the core rod.
Preferably, the upper mold comprises an upper shell and an upper mold set; The upper module consists of several upper modules stacked on top of each other; The upper module is arranged in the upper shell; The lower mold comprises a lower shell and a lower mold set; A push block is slidably arranged on the lower shell; The clamp block is fixed on the lower shell; The lower module consists of several lower modules stacked on top of each other; A lower module is arranged in the lower housing; A bracket is slidably arranged between the lower modules; The upper module and the lower module are provided with exhaust grooves that are respectively connected to the insulator mold cavity and the outside.
Preferably, the upper module is pressed onto the lower module; Both ends of the upper module and the lower module are provided with connector modules; A locking block is fixed on the outer side of the connector module; The two ends of the core rod are fixed in the locking block.
Preferably, the connector module is provided with a first screw hole; A second screw hole is arranged on the locking block; The screws are sequentially screwed into the second and first screw holes to secure the locking block to the connector module.
Preferably, the connector module is provided with a screw hole protection seat; A screw hole protection seat is arranged outside the opening of the first screw hole; The screws are sequentially screwed into the second screw hole, the screw hole protection seat, and the first screw hole to fix the locking block on the connector module.
Preferably, both ends of the core rod are sheathed with core rod protective sleeves; The core rod protection sleeve is arranged inside the locking block to separate the core rod and the locking block.
The beneficial effects of the utility model are: the utility model is provided with a mold ejection mechanism, which can automatically carry the manufactured insulator out of the mold; A sandwich mechanism is provided to prevent the core rod from being deflected due to pressure during the insulator injection molding process. Therefore, the utility model has fast production efficiency and good product quality in manufacturing insulators.
Schematic diagram of insulator mold
Dongguan Guandong Rubber and Plastic Technology Co., Ltd. has been engaged in producing insulator molds, lightning arrester molds, and bushing molds for over 20 years, and has rich experience in producing such molds.

Related News


Silicon rubber high-voltage composite insulators have many superior performances that traditional insulators cannot match

Due to the superior performance that many traditional insulators cannot match, silicone rubber high-voltage composite insulators have been increasingly used at home and abroad. The research and development of silicone rubber high-voltage composite insulators in China is relatively late, but they are also developing rapidly. According to information


Powder with high hardness, low plasticity, and high friction has poor compaction performance

The smoother the surface of the molding mold, the higher the hardness, and the greater the rigidity, the more conducive to the improvement and uniformity of the density of the damaged body; The green body density using two-way pressing is higher than that using one-way pressing,


The gate is directly related to the beauty of the plastic part. If the gate design is not good, it is prone to defects

The gate is directly related to the beauty of the plastic part. If the gate design is not good, it is prone to defects. It is easy to generate serpentine flow without any obstruction. For products with high requirements, overflow and exhaust should also be designed.


Analysis on composition and structure of plastic injection mold

Plastic injection molds are basically divided into static and dynamic molds. The injection head side of the injection molding machine with a gate sleeve is a static mold, which generally consists of a gate sleeve, a backing plate, and a template. For simple molds, it is also possible to use a thicker template instead of a backing plate.


The accuracy of the mold will become higher and higher

The mold industry is an important component of China's hardware industry. The 12th Five Year Plan period is a key period for China to properly respond to major changes in the domestic and foreign development environment and accelerate the realization of the goal of building a moderately prosperous society in an all-round way


What are the main factors affecting the mold pressing process

Powders with high hardness, low plasticity, and high friction have poor compaction performance, which can be appropriately improved by adding lubricants or molding agents; When the powder purity is low and the oxygen content is high, the pressing performance is poor,