Powder with high hardness, low plasticity, and high friction has poor compaction performance
Publish:
2023-03-07 16:21
Source:
(1) Effect of powder properties
Powders with high hardness, low plasticity, and high friction have poor compaction performance, which can be appropriately improved by adding lubricants or molding agents; When the powder purity is low and the oxygen content is high, the pressing performance is poor, which can be overcome by reducing the raw powder; Single fine or coarse particle powders, as well as powders with regular shapes, are not ideal for compaction performance. Using mixed particle size powders and powders with complex particle shapes can improve compaction performance.
(2) Impact of the pressing process
The smoother the surface of the molding mold, the higher the hardness, and the greater the rigidity, the more conducive to the improvement and uniformity of the density of the damaged body; The green body density using two-way pressing is higher and more uniform than that using one-way pressing; The lower the pressing speed and the longer the holding time are, the more beneficial it is to improve the green body density, especially for abrasive tools with large specifications or complex shapes.
Related News
Due to the superior performance that many traditional insulators cannot match, silicone rubber high-voltage composite insulators have been increasingly used at home and abroad. The research and development of silicone rubber high-voltage composite insulators in China is relatively late, but they are also developing rapidly. According to information
Powder with high hardness, low plasticity, and high friction has poor compaction performance
The smoother the surface of the molding mold, the higher the hardness, and the greater the rigidity, the more conducive to the improvement and uniformity of the density of the damaged body; The green body density using two-way pressing is higher than that using one-way pressing,
The gate is directly related to the beauty of the plastic part. If the gate design is not good, it is prone to defects. It is easy to generate serpentine flow without any obstruction. For products with high requirements, overflow and exhaust should also be designed.
Analysis on composition and structure of plastic injection mold
Plastic injection molds are basically divided into static and dynamic molds. The injection head side of the injection molding machine with a gate sleeve is a static mold, which generally consists of a gate sleeve, a backing plate, and a template. For simple molds, it is also possible to use a thicker template instead of a backing plate.
The accuracy of the mold will become higher and higher
The mold industry is an important component of China's hardware industry. The 12th Five Year Plan period is a key period for China to properly respond to major changes in the domestic and foreign development environment and accelerate the realization of the goal of building a moderately prosperous society in an all-round way
What are the main factors affecting the mold pressing process
Powders with high hardness, low plasticity, and high friction have poor compaction performance, which can be appropriately improved by adding lubricants or molding agents; When the powder purity is low and the oxygen content is high, the pressing performance is poor,