Silicon rubber high-voltage composite insulators have many superior performances that traditional insulators cannot match


Due to the superior performance that many traditional insulators cannot match, silicone rubber high-voltage composite insulators have been increasingly used at home and abroad. The research and development of silicone rubber high-voltage composite insulators in China is relatively late, but they are also developing rapidly. According to information, in 2001, the number of silicone rubber high-voltage composite insulators operating on high-voltage lines in China reached 1.9 million, and the annual growth rate is over 25%, greatly promoting the development of the electric power industry, improving the safety of electricity consumption, with dual social and economic benefits. According to this calculation, China will need more than 15 million silicone rubber composite insulators per year to be put into operation in 2010.
Silicone rubber insulator generally refers to a composite insulator mainly composed of an umbrella disc (umbrella skirt or sheath), a core rod, and a metal end. The umbrella disc is made of heat vulcanized silicone rubber, and the core rod is made of epoxy resin through a special process. Compared with traditional ceramic or glass string, it has many advantages, mainly shown in:
1. Light weight and high strength. Due to the fact that its main constituent materials are silicone rubber and epoxy resin, which have a much lower unit weight than ceramics and glass, and only have metal connection accessories at both ends, the overall weight is only 1/10-1/7 of that of ceramic and glass string insulators, while its tensile strength is 3-4 times higher.
2. Excellent electrical insulation and anti pollution flashover performance. Due to the fact that both the umbrella skirt and sheath are made of highly insulating silicone rubber materials with low surface energy, good water repellency, UV resistance, ozone resistance, and other excellent weather resistance properties, as well as non flame retarding and self extinguishing properties, greatly improving the contamination and moisture condition of the surface of high-voltage insulation equipment, improving insulation strength and stain resistance, effectively improving electrical safety, basically eliminating manual cleaning, and reducing maintenance costs.
3. The overall structure increases the creep distance ratio. Due to the fact that the silicone rubber high-voltage composite insulator is structurally composed of a single piece, with only two electrodes at the top and bottom, its creep distance ratio is much greater than that of ceramic and glass insulator strings, which to some extent also enhances its electrical insulation performance.  
4. It is conducive to the miniaturization of urban overhead power lines. Due to its light weight, it can reduce the load on poles and towers, reduce the distance between lines, and reduce the width of line corridors. It shows the advantages of light weight, high efficiency, and low total cost, which is conducive to the miniaturization of urban overhead lines and provides new technical conditions for high-voltage transmission lines.

Related News


Silicon rubber high-voltage composite insulators have many superior performances that traditional insulators cannot match

Due to the superior performance that many traditional insulators cannot match, silicone rubber high-voltage composite insulators have been increasingly used at home and abroad. The research and development of silicone rubber high-voltage composite insulators in China is relatively late, but they are also developing rapidly. According to information


Powder with high hardness, low plasticity, and high friction has poor compaction performance

The smoother the surface of the molding mold, the higher the hardness, and the greater the rigidity, the more conducive to the improvement and uniformity of the density of the damaged body; The green body density using two-way pressing is higher than that using one-way pressing,


The gate is directly related to the beauty of the plastic part. If the gate design is not good, it is prone to defects

The gate is directly related to the beauty of the plastic part. If the gate design is not good, it is prone to defects. It is easy to generate serpentine flow without any obstruction. For products with high requirements, overflow and exhaust should also be designed.


Analysis on composition and structure of plastic injection mold

Plastic injection molds are basically divided into static and dynamic molds. The injection head side of the injection molding machine with a gate sleeve is a static mold, which generally consists of a gate sleeve, a backing plate, and a template. For simple molds, it is also possible to use a thicker template instead of a backing plate.


The accuracy of the mold will become higher and higher

The mold industry is an important component of China's hardware industry. The 12th Five Year Plan period is a key period for China to properly respond to major changes in the domestic and foreign development environment and accelerate the realization of the goal of building a moderately prosperous society in an all-round way


What are the main factors affecting the mold pressing process

Powders with high hardness, low plasticity, and high friction have poor compaction performance, which can be appropriately improved by adding lubricants or molding agents; When the powder purity is low and the oxygen content is high, the pressing performance is poor,