ABOUT

Tailored molds for customers that can produce high-quality, low defect rates

Silicone rubber insulator

Product content

10KV suspension insulator mold

1 out of 32. lastic injection molds are basically divided into static and dynamic molds. The injection head side of the injection molding machine with a gate sleeve is a static mold, which generally consists of a gate sleeve, a backing plate, and a template. For simple molds, it is also possible to use a thicker template instead of a backing plate.

隐藏域元素占位

Mould for railway line insulator

1 mold, 2 pieces Plastic injection molds are basically divided into static and dynamic molds

隐藏域元素占位

35-66KV suspension insulator mold

1 mold, 8 pieces.Plastic injection molds are basically divided into static and dynamic molds

隐藏域元素占位

Mold for Insulator at Railway Roof End

1 mold and 1 piece,Plastic injection molds are basically divided into static and dynamic molds

隐藏域元素占位

12-15KV suspension insulator mold

1 mold, 2 pieces.Plastic injection molds are basically divided into static and dynamic molds. The injection head side of the injection molding machine with a gate sleeve is a static mold, which generally consists of a gate sleeve, a backing plate, and a template. For simple molds, it is also possible to use a thicker template instead of a backing plate.

隐藏域元素占位

66KV suspension insulator mold

1 mold, 2 pieces

隐藏域元素占位

27KV fuse mold

Of course, there are also inclined guide molds, such as inclined guide boxes and columns. When designing a mold for a product, it is first necessary to set the basic structural dimensions of the mold to prepare materials to speed up mold manufacturing. For complex products, the product drawing should be drawn first, and then the mold size should be determined.

隐藏域元素占位

10KV post insulator mold

In addition to the stripper bar, there are also return bars in the mold release mechanism. Some molds also need to add springs to achieve functions such as automatic mold release. There are also guide pillars, cooling water holes, flow channels, and other essential basic structures of the mold.

隐藏域元素占位

Post insulator mold

Plastic injection molds are basically divided into static and dynamic molds. The injection head side of the injection molding machine with a gate sleeve is a static mold, which generally consists of a gate sleeve, a backing plate, and a template. For simple molds, it is also possible to use a thicker template instead of a backing plate. The sprue sleeve is generally a standard part, and it is not recommended to cancel it unless for special reasons. The use of the sprue sleeve is beneficial for installing the mold, facilitating replacement, and eliminating the need for self polishing. Some special mold runner sleeves can be drilled out or cut with a taper line.

隐藏域元素占位

Sealing ring mold

In addition to the stripper bar, there are also return bars in the mold release mechanism. Some molds also need to add springs to achieve functions such as automatic mold release.

隐藏域元素占位

News content

undefined

undefined